Eng 简体

nRF9151 SMA DK Development kit

Development kit for LTE-M, NB-IoT, NTN, GNSS and DECT NR+

The nRF9151 SMA DK is a single-board development kit for the nRF9151 SiP, designed specifically for developers who require maximum performance and flexibility. It replaces internal antennas with SMA connectors for LTE-M/NB-IoT/NTN/DECT NR+ and GNSS, enabling direct connection to lab equipment or high-performance external antennas. This makes it the ideal platform for precise RF characterization, power measurements, and demanding field testing of applications using LTE-M, NB-IoT, NB-NTN, DECT NR+, and GNSS.

Key Features:

  • Maximum RF Flexibility: Dedicated SMA connectors for LTE/NTN/NR+ and GNSS enable conducted measurements with lab equipment or connection of external antennas for optimized field test performance. (Antennas included with the kit for NTN/LTE-M/NB-IoT and GNSS)
  • Comprehensive Connectivity: Powered by the nRF9151 SiP, the kit supports NTN, LTE-M, NB-IoT, DECT NR+, and GNSS. It is the recommended kit for developing and evaluating direct-to-satellite solutions.
  • Flexible SIM Technology: Features both a nano/4FF SIM card slot and an MFF2 SIM footprint, providing support for traditional plug-in SIMs as well as soldered eSIMs or software iSIMs. (SIMs supporting terrestrial and NTN is included with the kit)
  • Extensive Prototyping Options: Full access to all GPIOs and interfaces is available via connectors. Arduino Uno Rev3 compatibility enables easy integration with a wide range of third-party shields, including the nRF7002 EK for adding Wi-Fi locationing capabilities.
  • On-Board Debugging: An integrated SEGGER J-Link debugger allows for programming and debugging the onboard nRF9151 SiP and can also be used to program and debug external targets.
  • User Interface: Includes four user-programmable LEDs and four buttons for direct user interaction and status indication without additional hardware.

PDF IconDownload nRF9151 SMA DK product brief (PDF)

Ask us about this
Key features
  • SMA connectors for lab equipment or external antennas
  • Supports LTE-M, NB-IoT, NTN, DECT NR+, GNSS 
  • Arduino Uno form factor
  • 4 LEDs user-programmable
  • 4 buttons user-programmable
  • SEGGER J-Link OB Debugger with debug out support
  • UART interface through VCOM port
  • USB connection for debug/programming and power
  • Includes high-performance Taoglas (LTE/NTN/NR+) and Kyocera (GNSS) antennas.
  • Bundled with IoT SIM cards with trial data for immediate terrestrial and satellite connectivity
Documentation
Downloads
Evaluate NTN

Evaluate NTN

First-Time nRF9151 Users

If you are new to the nRF91 Series and the nRF Connect SDK toolchain, we strongly recommend following the nRF9151 SMA DK Getting Started tab first (LTE-M/NB-IoT only). This will ensure your kit is recognized and your development environment is correctly configured before you proceed with the NTN-specific instructions.

Getting Started with NTN

The nRF9151 SMA DK, supports Non-Terrestrial Networks (NTN) using both Geostationary (GEO) and Low Earth Orbit (LEO) satellites.

To begin your NTN evaluation, please download the following:

  1. Installation and evaluation instructions: Alpha Documentation Package
  2. NTN Modem Firmware: mfw_nRF9151-ntn_1.0.0-1.alpha
  3. Serial Modem v0.3.0 application firmware: serial_modem_v0.3.0_nrf9151dk_ppp_cmux.hex

Read the getting started guide within the documentation package for full instructions on how to set up your nRF9151 SMA DK for NTN operation.

GEO and LEO Configurations

The process for connecting to both GEO and LEO satellite networks is similar. 

Refer to the "NTN operation AT examples" document inside the Alpha Documentation Package to find the specific AT command sequences required to establish an NTN connection for each network type.

Important Consideration for LEO Networks

Current public NB-IoT LEO networks provide discontinuous coverage, meaning a satellite is not always available overhead.

This requires additional logic in your application. Your firmware must be able to predict when a satellite will be visible at the device's location to know when to successfully transmit and receive data.

Get started with NTN GEO

Ready to connect your nRF9151 SMA DK directly to a GEO satellite network?

Skylo can provide 5G standard NB-IoT NTN connectivity over their GEO constellation.

icon
 
To begin your GEO NTN journey with Skylo, follow the instructions provided in our Alpha Documentation Package



Myriota provides their HyperPulse GEO NTN connectivity platform that makes it simple for industry partners to build, deploy and scale IoT solutions on Nordic's nRF9151.

  • For more details on HyperPulse and to order a HyperPulse SIM please click here
  • For details on "Getting started" with nrf9151 SMA DK for HyperPulse please refer to the instructions here

Get started with NTN LEO

Ready to connect your nRF9151 SMA DK directly to a Low Earth Orbit (LEO) satellite network?

Sateliot provides 5G standard NB-IoT NTN connectivity over their Low Earth Orbit (LEO) constellation.


 
To begin your LEO NTN journey, visit the Sateliot Tech Portal.

Their step-by-step guide will walk you through activating your service and connecting to a satellite from virtually anywhere on Earth.
 
Go to Sateliot Tech Portal